Features
- The ActiLume system consists out of three state-of-art miniature sensors combined with a controller containing a series of pre-programmed modes
- The two most applied modes, cell and open plan offices, can be selected via a single push on the service button
- ctiLume offers the possibility to select so called “comfort modes” in line with the EN 12464 indoor lighting norm. These modes can be recalled by using a simple mode selection tool IRT9090
- If needed, further customization can easily be established by changing the factory settings with the mode selection tool IRT9090
- The ActiLume controller contains two DALI outputs. These outputs are preprogrammed (factory setting) as a window and corridor row with a fixed light offset
- ActiLume Dali can control up to 11 ballasts
- The system can be extended with 1 or 2 additional movement detectors, LRM8118 and/or LRM8119 to maximize movement coverage. This respectively reduces the number of ballasts per controller to 10 or 9
- Factory light level setting is at 600 lux at a reflection factor of 0.3
Application
- Typical office applications, as open-plan and cell offices
- Other applications like lobbies, corridors and small meeting rooms
- Offers specific comfort modes, for example for schools, light-lines and direct/
- indirect lighting concepts
- Optimized for ceiling heights of between 2.5 to 4 meters
